Lifescan One Touch ll Owner's Booklet page 59

Setting the date format
(Date Format Mode)
Your Meter is set at the
factory to display the
month, day, and year (in
that order) with each blood
glucose result stored in the
Meter memory (for example:
(9 . 2 3 . 9 4). You can set the
Meter to display the day,
month, and year (23 . 0 9 . 9 4),
as is commonly read in
Europe, by following the
instructions on the chart on
page 60.
Selecting AM/PM or 24:00
time (AM/PM/24:00 Mode)
Your Meter is set at the
factory to display time in
AM and PM (for example:
8:00 PM). You may set the
time to read in European/
military format (for
example: 20:00 hours) by
following the instructions
on the chart on page 60.
58
• •
Selecting the data
management interface (Data
Management Mode)
II Meter
The ONE TOUCH ®
has the ability to commu-
nicate with several types of
data management systems,
which makes it easier for
you and/or your healthcare
professional to review and
analyze your results.
On the side of the Meter
there is a port marked Data,
which allows you to
connect to various data
management systems. To
communicate with these
systems, you will need to