Lifescan One Touch ll Owner's Booklet page 45

Step 2: Clean Test Strip
Holder
1. Wash the Test Strip
Holder with soap and water.
2. Clean the underside of
the Test Strip Holder and
check the small hole for any
debris.
3. Dry completely with a
soft cloth or tissue. Remove
any lint.
44
• •
Step 3: Clean Test Area
While the Test Strip Holder
is still removed, clean the
surface of the Test Area,
normally covered by the
Test Strip Holder. This area
may not look dirty to you,
but it still needs to be
cleaned.