Lifescan One Touch ll Owner's Booklet page 21

Step 2:
Match the
code
number
Press
code 7
the Code
Button (C).
code 7
(example)
will reappear on the display
for several seconds. With
code 7
(example)
on the display, press and
release the Code Button
again, and the number will
advance by one. Continue
pressing until the number
on the display matches the
code number on your Test
Strip package.
code10
(example)
The Meter is now properly
coded, and you may
proceed with the test. From
now on, the Meter will
remember that code until
you change the code for a
new package of Test Strips.
20
• •