The last Check Strip
Anotok
reading was outside the
acceptable range of
redo A
results.
test must be repeated.
Checking the System.)
continues, clean the Meter.
8, Cleaning and Maintaining the Meter.)
For further assistance, call the LifeScan
Technical Service Department for more
information.
Usually indicates a test
c 3. 8
done with Control
Solution. However, if this
contrl
message appears after a
blood test, it means that
(example)
your blood sample was
The Check Strip
(See Chapter 3,
If the message
(See Chapter
•
too small, smeared, or a second drop was
applied after the test began. Your test
result will not be accurate.
test using a larger drop of blood.
Check the Amount of Blood on the Test
Strip in Chapter 6, Testing Your Blood.)
All segments on the
display will appear when
the On/Off Button is pressed and held.
any part of the display does not appear,
call the LifeScan Technical Service
Department:
Canada
1 800 663-5521
U.S.A.
1 800 227-8862
37
•
Repeat the
(See
If