High Beam; Headlamp Flash; Misted Lamp Covers; Lighting - Chevrolet Sail Diesel Owner's Manual

68 Lighting

High Beam

ODO
To turn on high beam headlamps:
— Ensure that the headlamps are in
low beam state.
Push the combination switch lever
—
towards the dashboard.
When the headlamp high beam is
turned on, the headlamp high beam
indicator light illuminates. To
switch the headlamp from high
beam to low beam, pull the
combination switch lever back
towards you to resume the normal
position.
Warning
Always switch the high-beam
headlamps to low-beam when you
approach on coming vehicles or
when other vehicles are ahead.
High-beam headlamps can tempor-
arily blind other drivers, which could
result in a collision.

Headlamp Flash

To make the headlamps high beam
flash, pull the combination switch lever
towards you and release. When you
release it, the lever will return to the
normal position.
If you pull the combination switch lever
towards you and hold, the headlamp
high beam will stay on.
Headlamp flash will work irrespective
of light switch position.

Misted Lamp Covers

The inside of the light housing may
mist up briefly in poor, wet and cold
weather conditions, in heavy rain or
after washing. The mist disappears
quickly by itself. To help, switch on the
headlights.