Chevrolet Sail Diesel Owner's Manual page 134

130 Vehicle Maintenance
Jack handle
Jack
Wheel wrench
10. When rotating the jack handle,
make sure the jack base is in contact
with ground and directly under the
notch on the lugs.
11. Slowly rotate the jack handle to
raise the vehicle.
12. Completely loosen the wheel nuts.
13. Change the wheel.
14. Reinstall the wheel nuts and tighten
slightly.
15. Lower the vehicle.
S3W5023A
16. Tighten the wheel nuts to 130 Nm,
in a diagonal pattern.
17. Store the flat tire in the rear
compartment together with the
tools and jack that are properly
packaged.
18. Have the tire fixed as soon as you
can. Reinstall it on the vehicle after
balancing.
Tool packing steps
1. Place the wheel wrench and jack
handle into the specified position.
2. Put the jack into the tool bag, facing
upward.
3. Bundle up the tool bag tightly.
4. Store the tool bag in the spare wheel
compartment. Place it in front-rear
direction.
S3W5023B
5. Store the tow hook in a cover*
provided on rear carpet.
S3W5011A