Water In Fuel Indicator Light; Glow Plug Indicator Light; Other Warning Tone Prompts - Chevrolet Sail Diesel Owner's Manual

Hide thumbs Also See for Sail Diesel:
Table of Contents

Advertisement

66 Instruments and Controls

Water in Fuel Indicator Light

Illuminates, when the water level, in the
water separator (separated from the
diesel fuel) reaches to the maximum.
If the light comes on and remains on
with the engine running, it indicates the
need for draining of the water separator.
Please visit the nearest CHEVROLET
retailer for the water draining.
Caution
Engine high pressure fuel system
will get damaged severely, if water
from the water separator is not
drained on time.
If water separator requires frequent
draining, have the fuel tank drained
at your CHEVROLET retailer.

Glow Plug Indicator Light

Illuminates when the ignition is ON and
stays on for a short time or may go off
right away. The waiting time will vary
according to the engine coolant temper-
ature.
When the glow plugs are sufficiently
heated for cold starting, the light will go
out. Then the engine should be started.
Glow plug indicator light blinks conti
uously to indicate any non emission
faults (including glow plug system
faults) and immobilizer related prob-
lems. See your CHEVROLET retailer
for service.

Other Warning Tone Prompts*

In the following circumstances the
vehicle will give an alarm tone to
prompt the driver:
After the vehicle's engine has been
shut off, if the key is not removed
from the ignition switch before
opening any door;
After the vehicle's engine has been
shut off, if the headlamps are not
switched off before opening any
door;
The vehicle speed exceeds 122
km/h.
Depending on the model, some
vehicles may not have some or all of the
above alarm tone prompt functions.

Advertisement

Table of Contents
loading

Table of Contents