Set Startup Key - Uniden BCD996T Owner's Manual

UB335ZH.book Page 78 Friday, March 17, 2006 4:35 PM
Notes:
• Access single-digit system/site Quick Keys by pressing the single digit on the
keypad during scanning. Access two-digit system Quick Keys by pressing
[.No] then both digits.
• You can assign as many systems to the same quick key as you want.
• To be scanned, a system's Quick Key must be activated and the system must
be unlocked.
Setting the Site Startup Key
[MENU]
Program System
Select a trunked system
Edit Site
Select a Site

Set Startup Key

Select a startup key from 0-9 or select "." for no startup key.
Notes:
• To unlock the system at startup, press and hold the selected startup key while
you turn on the scanner.
• The system Quick Key is also enabled.
• If you press a different key at startup, the system is locked out.
• If you do not assign the system a startup key, the system is not affected by any
key press during startup.
Setting Site Frequencies
[MENU]
Program System
Select a trunked system
Edit Site
Select the site
Set Frequencies
New Frequency (or select an existing frequency)
frequency using the number keys and [.No] key, then press
frequencies for an LTR or EDACS system, the scanner will also prompt you to
enter the LCN for the frequency you just entered. LCN's (logical channel numbers)
are provided from the same source where you got the other system information.
To enter additional frequencies, press [MENU], then
Frequency. Then repeat the above.
78
MESL
MESL
Input a system
. If you are entering
to select New