Table of Contents
Advertisement
UB335ZH.book Page 56 Friday, March 17, 2006 4:35 PM
- Polarity — If the headlight wire is connected to vehicle ground when the
headlights are on, pick this setting.
Manual — Use this setting to manually set the dimmer level to High, Middle,
Low, or Off. To guide you in your selection, at each setting the display shows what
you can expect to see.
Setting the Backlight Color
[MENU]
Settings
Set Backlight
Set Color
Set this option to either Red or Green.
Adjusting the Key Beep
[MENU]
Settings
Adjust Key Beep
Auto — the scanner automatically sets the key beep to match the master volume
setting level you select.
Level 1 - 15 — the scanner lets you manually select one of fifteen key beep
levels. As you turn the Scroll Control, the beep gets louder. Press
reach the desired level.
Off — the scanner turns the key beep off.
Setting the Audio AGC
[MENU]
Settings
Set Audio AGC
This setting helps balance the audio level you hear as you listen to different radio
sources so you can hear them at a similar volume. Use this setting if you listen to
an audio source that has natural changes in audio level for which you want to
compensate.
You can set the Analog or the Digital mode to be on or off.
to select either on or off specifically for receiving analog channels.
Analog
On — Press
to select.
Off — Press
to select.
56
when you
Advertisement
Table of Contents
