Table of Contents
Advertisement
UB335ZH.book Page 3 Friday, March 17, 2006 4:35 PM
®
LTR
is a registered trademark of E.F. Johnson Co.
®
EDACS
is a registered trademark of M/A-COM Private Radio Systems Inc.
®
Uniden
and Bearcat
Trunk Tracker™, Trunk Tracking™, and Close Call™ are proprietary trademarks of
Uniden America Corporation.
Other trademarks used throughout this manual are the property of their respective
holders.
Power Related Issues
Important: To prevent memory from being corrupted, do not unplug the AC
adapter during the time the memory is accessed for programming or auto store.
Notes:
• If when you connect the AC adapter the [VOL] /Power Switch is ON, the
scanner may not power on. Should this occur, simply turn the control OFF, then
ON again.
• If the scanner loses power (as when you turn off your car's ignition with the
scanner's power switch on), it can lose some system settings such as display
color and backlight. To ensure that such settings persist, either change the
setting using the scanner's menu or power the scanner off then back on using
the power switch after making such setting changes.
• When you turn off the scanner using the power switch, the scanner remembers
the last settings and mode. When you turn power back on, it resumes the
previous mode.
®
are registered trademarks of Uniden America Corporation.
Precautions
3
Advertisement
Table of Contents
