General Lubrication - Ariens 924118 - 8524 Owner's/Operator's Manual

1
3
1. Auger Gearcase - Cast Iron
2. Oil Fill and Drain Plug
3. Auger Gearcase - Aluminum
Figure 10

GENERAL LUBRICATION

IMPORTANT: Wipe each fitting clean before
and after lubrication.
IMPORTANT: DO NOT allow grease or oil to
get on friction disc, friction plate or belts.
NOTE: Apply Stens Mix Hi-Temp Grease or
equivalent to the lubrication fittings. See
Service Parts.
2
1 1
2
1 1
1. Auger and Shaft
2. Discharge Chute
3. Sprocket/Pinion
Assembly
4. Axle Shaft
Sno-Thro should be lubricated (Figure 11) at
beginning of season or every 25 operating
hours.
Auger Shaft
NOTE: To grease auger shaft, remove shear
bolt nuts, and shear bolts. Turn auger on shaft
while applying grease at zerk fittings. Replace
shear bolt per instructions in Service and
Adjustments.
2
8
6
7
3
5. Shift Lever Arm
6. Pinion Chain
7. Hex Shaft
8. Shift Link
Figure 11
GB - 21
5
4
Grease
Oil
OS0641
OS0741