Black & Decker BDG2600-B3 Instruction Manual page 27

• High-velocity fluid spray directed • On pressure washers rated above
at pneumatic tire sidewalls (such
as found on automobiles, trailers
and the like) could damage the
sidewall resulting in serious injury.
WARNING: RISK Of hOT SURfACES
WhAT CAN hAPPEN
• Con t act with hot sur f ac e s, such • During op e r a t ion, touch only the
as engines exhaust com po nents,
could result in se ri ous burn.
WARNING: RISK Of ChEMICAL BURN
WhAT CAN hAPPEN
• Use of acids, toxic or corrosive • Do not spray ac i ds, gasoline, ker-
chemicals, poisons, in sec ti cides,
or any kind of flam ma ble solvent
with this product could re sult in
se ri ous injury or death.
• Wear pro t ec t ive clothing to protect
WARNING: RISK Of INJURy fROM LIfTING
WhAT CAN hAPPEN
• Serious injury can result from • The pressure washer is too heavy
attempting to lift too heavy an
object.
Save theSe inStructionS
for future uSe
52- ENG
1600 psi (11032 kPa) use the widest
fan spray (40º nozzle) and keep the
spray a minimum of 8" (20 cm) from
the pneumatic tire sidewall. Do not
aim spray directly at the joint between
the tire and rim.
hOW TO PREVENT IT
control surfaces of the pres sure
washer. Keep children away from the
pres sure washer at all times. They
may not be able to recognize the haz-
ards of this product.
hOW TO PREVENT IT
o sene, or any other flammable
materials with this product. Use only
household de ter gents, cleaners and
degreasers recommended for use
with pres sure washers.
eyes and skin from con tact with
sprayed materials.
hOW TO PREVENT IT
to be lifted by one person. Obtain
assistance from others before lifting.
get to KnoW tHe Pressure WasHer
NOTE: Photographs and line drawings used in this manual are for reference
only and do not represent a specific model.
Compare the illustrations with your unit to familiarize yourself with the location of
various controls and adjustments. Save this manual for future reference.
1
G
K
L
B
I
J
BASIC ELEMENTS Of A
PRESSURE WAShER (fIG. 1)
A. high Pressure Pump (not shown):
Increases the pressure of the water
supply.
B. Engine: Drives the high pressure
pump. Refer to the engine manual
for location and operation of engine
controls.
C. high Pressure hose: Carries the
pressurized water from the pump
to the gun and spray wand.
D. Spray Gun: Connects with spray
wand to control water flow rate,
direction, and pressure.
53 - ENG
C
D
h
A
E
E. quick-Connect Spray Wand:
Allows the user to quickly change
out high-pressure nozzles.
See how To Use Spray Wand
instructions in Operation section.
f. Detergent Siphon hose
(BDG2600-B3 not shown): Feeds
cleaning agents into the pump to mix
with the water. See how To Apply
Chemicals/Cleaning Solvents
instructions in Operation section.
G. handle
h. frame
I. Pump Outlet