Advertisement
STEP 4
• Remove the PRESS CABLE (67249) from the KEYHOLE CLEVIS
and ELASTIC CORD. (NOTE: The LAT or LEG EXT CABLE can
be moved over one hole on the D-RING so the KEYHOLE CLEVIS
are evenly spaced .)
• Discard the KEYHOLE CLEVIS and ELASTIC CORD.
FIGURE 5
3/8" LOCK NUT
2" PULLEY
STEP 5
• Remove one 3-1/2" PULLEY, one 3/8" THREADED SHAFT, two 3/8" WASHERS, one 2" PULLEY (two if the 435104 is installed), one
3/8" HEX NUT and two 3/8" LOCK NUTS from the bracket on the TOP BOOM. See FIGURE 5.
• Discard the 3-1/2" PULLEY and the 3/8" THREADED SHAFT.
•
(NOTE: If the 100101 LEG PRESS OPTION is installed proceed to STEP 6 otherwise proceed to STEP 7.)
3/8" HEX NUT
3/8" WASHER
3-1/2" PULLEY
FIGURE 4
ELASTIC
CORD
KEYHOLE
CLEVIS
PRESS CABLE
(67249)
D-RING
3/8" THREADED ROD
6
TOP BOOM
3/8" WASHER
3/8" LOCK NUT
Advertisement
