Troubleshootiing - Geemarc PHOTOPHONE 155 User Manual

TROUBLESHOOTING
No display
•
Make sure that the power adaptor is plugged in correctly and is not
damaged
•
Check for a power cut in the area
PHOTOPHONE 155 does not ring
•
Make sure that the telephone line cord is plugged in correctly and
is not damaged
•
Connect another telephone to the telephone PTT socket or move
your telephone to another socket to track if the failure is coming
from your telephone or your PTT socket
•
There may be too many communication devices connected to a
single telephone line e.g. another telephone, modem or facsimile
machine. Contact your network provider for help in calculating the
limit for your home or business line
•
Check the Ringer is not switched to OFF
•
Check the Volume level of the ringer
No dial tone
•
Make sure that the telephone line cord is plugged in correctly and
is not damaged
•
Connect another telephone to the telephone PTT socket or move
your telephone to another socket to track if the failure is coming
from your telephone or your PTT socket
•
There may be too many communication devices connected to a
single telephone line e.g. another telephone, modem or facsimile
machine. Contact your network provider for help in calculating the
limit for your home or business line
•
Check that the dialing mode is set to the correct setting (tone or
pulse)
Interference on the line
•
Ensure a filter is fitted to all telephone sockets if you have a DSL
line
No Caller ID information displayed
•
Ensure you have requested the Caller ID service from your
network provider
No Amplification
•
Check the Amplify key has been pressed and the LED is lit (red).
59