ParaBody GS2 User Manual page 9

3/8 LOCK NUT
6
STEP 7:
• SECURELY attach the BRACKET (from LP5 LEG PRESS) to the SEAT FRAME using two 3/8" X 4-3/4" BOLTS (10), two 3/8"
WASHERS (5), and two 3/8" LOCK NUTS (6). See FIGURE 7.
FIGURE 8
STEP 8:
• Carefully route the LEG PRESS CABLE (2) around one 3-1/2" PULLEY (3) and SECURELY assemble the 3-1/2" PULLEY (3) to
the bracket on the SEAT FRAME using one 3/8 X 1-3/4" BOLT (7) and one 3/8" LOCK NUT (6) as shown in FIGURE 8. Make
sure the CABLE is in the grooves of all the pulleys.
1/2
0
5
1/2 1/2
1 2
BRACKET
10
3/8 X 4-3/4"
6
2
3
3/8 X 1-3/4" 7
SEAT FRAME
1/2
3 4
9
SEAT FRAME
FIGURE 7
1/2 1/2
5
6