ParaBody GS2 User Manual page 11

FIGURE 11
STEP 11:
• Carefully route the LEG PRESS CABLE (2) around one 3-1/2" PULLEY (3) and SECURELY assemble the 3-1/2" PULLEY (3)
to the SEAT FRAME using one 3/8 X 4-3/4" BOLT (10), two STEP SPACERS 1-19/32" (12), and one 3/8" LOCK NUT (6) as shown
in FIGURE 11. Make sure the CABLE is in the grooves of all the pulleys.
FIGURE 12
STEP 12:
• Carefully route the LEG PRESS CABLE (2) around one 3-1/2" PULLEY (3) and SECURELY assemble the 3-1/2" PULLEY (3) to
the MAIN ARM using one 3/8 X 2-3/4" BOLT (8), two STEP SPACERS 19/32" (11) and one 3/8" LOCK NUT (6) as shown in FIGURE
12. Make sure the CABLE is in the grooves of all the pulleys.
1/2
0
SEAT FRAME
3/8" LOCK NUT
6
1/2
1 2
3
MAIN ARM
6
3
2
1/2 1/2
3
11
2
3/8 X 4-3/4" 10
3/8 X 2-3/4" 8
1/2
4 5
12
11
1/2
6