Removing Large Oven Bake Element - Electrolux 30" Service Manual

2. Remove the four screws, two on each side, holding
the shield to the inner liner.
Two screws

Removing large oven bake element:

1. Disconnect power and remove the two screws that
hold the element to the oven liner.
2. Pull the element into the oven and disconnect the
wires.
Two screws
Removing the broil element large oven:
1. Disconnect power and unsnap the two wire hanger
from the front of the element.
Insulation
2. Remove the two screws holding broil element to the
Removing the oven sensor in the large oven:
1. Disconnect power, remove the shield from the rear
2. Remove the two screws holding the sensor to the
132
Two wire hanger
liner and pull the element into the oven.
Two screws
of the range and unplug the sensor.
Disconnect the sensor
rear wall and pull the sensor into the oven.