Jeep Renegade Owner's Handbook Manual page 44

The "Passenger AIRBAG" function is
used to activate/deactivate the front
passenger side airbag. Passenger's
protection active: the LED
comes on constantly on the dashboard
located in the instrument panel.
Passenger's protection not active:
the LED OFF on the dashboard
comes on constantly in the control
panel.
"Safety & Assistance"
For possible adjustments see
paragraph Uconnect™ in chapter
"Multimedia".
"Lights"
Select item "Lights" to make the
following adjustments: "Ambient
lighting", "Follow me", "Headlights while
opening", "Headlight sensor", "High
Beams Auto Dim", "Daytime Lights",
"Cornering lights".
"Doors & Locks"
Select item "Doors & Locks" to make
the following adjustments: "Autoclose",
"Auto unlock on exit", "Flash Lights
w/Lock", "Horn with Lock", "Horn
w/Remote Start", "Remote Unlock"
(versions without Passive Entry), "Door
Unlock" (versions with Passive Entry),
"Passive Entry".
42
Versions with
reconfigurable multifunction
display
ON On versions equipped with
reconfigurable multifunction display only
the following items are available:
"Display" (only items "See phone" and
"See navigation" can be selected),
"Security" and "Safety & Assistance"
(only item "Buzzer volume" can be
selected). All other items will be shown
and managed on the Uconnect™
system display.
TRIP COMPUTER
The "Trip computer" is used to display
information on vehicle operation when
the ignition device is at MAR.
This function is characterised by two
separate memories, called "Trip A" and
"Trip B", where the vehicle's "complete
missions" (journeys) are recorded in a
reciprocally independent manner.
"Trip A" allows the following values to
be displayed: "Distance travelled A",
"Average consumption A", "Journey
time (driving time) A".
"Trip B" allows the following values to
be displayed: "Distance travelled B",
"Average consumption B", "Journey
time (driving time) B". The "Trip B"
function may be excluded.
Both memories can be reset: (reset -
start of a new journey).
To reset the values of "Trip A" and "Trip
B" press and hold the OK button on
the steering wheel controls.
NOTE "Range" and "Instantaneous fuel
consumption" parameters cannot be
reset.