Jeep Renegade Owner's Handbook Manual page 22

PARKING LIGHTS
These lights can be switched on with
ignition device at STOP or with key
removed, by moving the light switch to
position O and then to position
The warning light switches on
in the instrument panel.
HEADLIGHTS OFF TIMER
Function activation: with lights on,
bring the ignition device to STOP. Then
switch off the headlights within 45
seconds: timing will start when the light
switch is turned to O.
IMPORTANT To activate this functions
the headlights must be deactivated
within 45 seconds after the ignition
device has been taken to STOP.
Function deactivation: this function is
deactivated by switching on the
headlights, the side lights or bringing
the ignition device to MAR. If the
headlights are switched off before
ignition, they will go out normally.
MAIN BEAM HEADLIGHTS
To activate the fixed main beam
headlights push left lever A fig. 26
(vehicle travel direction). The light
switch must be turned to AUTO or
.
The unstable position is activated by
pulling the lever towards you.
20
With main beam headlights on, the
warning light on the instrument
panel will come on at the same time.
.
26
The main beam headlights are
deactivated bringing the lever back to
the central stable position. Warning light
switches off in the instrument
panel.
Automatic main beam
headlights
This function is enabled with the display
Menu or the Uconnect™ system,
and with the light switch turned to
AUTO.
The first time the main beam headlights
are activated (pushing the left lever),
the function is activated (green warning
light come on in the instrument
panel).
If the main beam headlights are actually
on, the blue warning light
come on in the instrument panel.
To deactivate the automatic function
rotate the light switch ring nut to
position .
DIRECTION INDICATORS
Bring left lever A fig. 26 to the (stable)
position:
❒ upwards: activates the right direction
indicator;
❒ downwards: activates the left
direction indicator.
"Lane Change" function
If you wish to signal a lane change,
J0A0063C
place the left lever in the unstable
position for less than half a second. The
direction indicator on the side selected
will flash five times and then switch
off automatically.
HEADLIGHT ALIGNMENT
ADJUSTMENT
Headlight alignment
corrector
This device only works with the ignition
device at MAR and the dipped beam
headlights on.
To adjust rotate ring nut A fig. 27.
❒ Position 0: one or two people on the
front seats;
❒ Position 1: 4 passengers
❒ Position 2: 4 passengers + load in
will also the luggage compartment