Jeep Renegade Owner's Handbook Manual page 128

CHANGING AN EXTERIOR
LIGHT
Front upper light cluster
(main beam/dipped halogen
headlights)
To replace the bulb, proceed as follows:
❒ working from inside the engine
compartment, remove cover A fig. 106,
using the dedicated tab;
106
❒ turn the bulb and bulb holder
assembly B fig. 107 anticlockwise and
then remove it outwards;
107
126
❒ remove, outwards, the bulb and bulb
holder assembly C fig. 108,
disconnecting it from connector D;
108
❒ install the new bulb and bulb holder
assembly, ensuring that it is locked
correctly;
❒ then insert the bulb and bulb holder
unit in its housing and turn it clockwise,
J0A0260C
making sure that it is locked correctly.
IMPORTANT Only replace the bulb
when the engine is off. Also ensure that
the engine is cold, to prevent the risk
of burns.
Front upper light cluster
(main beam/dipped Xenon
gas discharge headlights)
For replacing these bulbs, contact
a Jeep Dealership.
J0A0261C
Front lower light cluster
Side light/daytime running lights (DRLs)
and front direction indicators
To replace the bulbs proceed as
follows:
❒ steer the wheels completely;
❒ using the screwdriver, undo screws A
fig. 109 and remove flap B;
J0A0414C
109
❒ remove electrical connectors C fig.
110;
110
J0A0211C
J0A0306C