Sip Settings - TANDBERG 150 MXP User Manual

Administrator Settings – Networks Settings

SIP Settings

Display Name. The Display name part of the SIP
Address (URI) is normally a full name or system name.
Examples: "Alice Wonderland"
"System 01"
Mode
On Setting the SIP mode to on will enable the
system for incoming and outgoing SIP calls.
Off Setting the SIP mode to off will disable incoming
and outgoing SIP calls from the system.
See IP Settings
Current RFC's and Drafts supported:
• RFC 3261 SIP: Session Initiation Protocol
• RFC 2327 SDP: Session Description Protocol
• RFC 3264 An Offer/Answer Model with the Session Description
Protocol (SDP)
• RFC 3263: Session Initiation Protocol (SIP): Locating SIP Servers
– No support for NAPTR records.
• RFC 3311 The Session Initiation Protocol (SIP) UPDATE Method
• RFC 2976 SIP INFO Method
D 13640.04
MARCH 2006
for a description.
• Draft-levin-mmusic-xml-media-control-03.txt – used for video fast
picture update requests
• RFC 3361 Dynamic Host Configuration Protocol (DHCP-for-IPv4)
Option for Session Initiation Protocol (SIP) Servers
• RFC 3550 RTP: A Transport Protocol for Real-Time Applications
• RFC 2032 RTP Payload Format for H.261 Video Streams
• Draft-ietf-avt-rfc2032-bis-06.txt – draft for advanced video
signaling including resolution and mpi.
• RFC 2190 RTP Payload Format for H.263 Video Streams
• RFC 2429 RTP Payload Format for the 1998 Version of ITU-T Rec.
SIP Address. The SIP Address is the SIP URI used
to address the system.
Examples: "alice@example.com" "1234"
"1234@example.com"
Default transport type for
outgoing connections. Choose
between TCP and UDP.
Server Type. Available servers are:
Auto, Nortel, Microsoft and Experimental.
59
Server Discovery
Auto. When Auto is selected, the SIP Server address is obtained
using Dynamic Host Configuration Protocol (DHCP).
Manual. When Manual is selected, the manually configured SIP
Server address will be used.
Server Address. The Server Address is the manually
configured address for the outbound proxy and registrar.
It is possible to use a fully qualified domain name, or an
IP address. The default port is 5060 for TCP and UDP ,
but another one can be provided.
Examples: "sipserver.example.com" "sipserver.
example.com:5060" "10.0.0.2" "10.0.0.2:5061"
Authentication. User
Name. This is the
Media Capabilities supported in SIP
user name part of
Audio:
the credentials used
PCMU (G.711 u-law)
to authenticate
PCMA (G.711 a-law)
toward the SIP
G.722 64 kbps
Server.
G722.1 24 kbit
Password. This
G.722.1 32 kbps
is the password
Video:
part of the
H.261: QCIF 1/30, CIF 1/30
credentials used to
authenticate toward
H.263: SQCIF 1/30, QCIF 1/30, CIF 1/30, 4CIF 2/30
the SIP Server.
H.263++: XGA 4/30, SVGA 3/30, VGA 2/30, SQCIF
1/30, QCIF 1/30, CIF 1/30, 4CIF 2/30
H.264: CIF, W288p
H.263 Video (H.263+)
• Draft-ietf-avt-rfc2429-bis-05.txt – draft for advanced video
signaling including resolution, mpi, annexes and custom formats.
• RFC 3047 RTP Payload Format for ITU-T Recommendation G.722.1
• RFC3581 An Extension to the Session Initiation Protocol (SIP) for
Symmetric Response Routing
• RFC3984 RTP Payload Format for H.264 Video
• RFC3016 RTP Payload Format for MPEG-4 Audio/Visual Streams
TANDBERG 150MXP
USER GUIDE