Advertisement
FIGURE 7
STEP 7:
• Loop CABLE ASSEMBLIES (26) around the 4-1/2" PULLEYS (27) and route CABLE ASSEMBLY (26) back through
UPPER SUPPORT (11) as shown in FIGURE 7.
• SECURELY assemble the 4-1/2" PULLEYS (27) to the UPPER SUPPORT (11) using two 3/8 X 2" BOLTS (18) and two 3/8"
LOCK NUTS (22) as shown in FIGURE 7.
• Finish the assembly of the UPPER SUPPORT (11) to the LEFT & RIGHT UPRIGHTS (9 & 10) using two 1/2 X 4" BOLTS
(17), two 1/2" WASHERS (20), and two 1/2" LOCK NUTS (21) as shown in FIGURE 7. (NOTE: MAKE SURE CABLE IS
INSIDE OF THE 1/2" BOLT AS SHOWN IN DETAIL.)
• SECURELY TIGHTEN ALL LOOSE BOLT CONNECTIONS MADE TO THIS POINT.
11
22
21
20
26
9
BOLT
27
18 3/8 X 2"
17 1/2" X 4"
CABLE
Advertisement
