Advertisement
2
LEFT
FIGURE 9
STEP 9:
• Slide one 1-1/2" THRUST BEARING (25), one RIGHT SAFETY HOOK (6), and one 1" SHAFT COLLAR (24) over the
SAFETY STOP (2) as shown in FIGURE 9.
• Slide one 1-1/2" THRUST BEARING (25), one LEFT SAFETY HOOK (5), and one 1" SHAFT COLLAR (24) over the
SAFETY STOP (2) as shown in FIGURE 9.
• Using a 3/16" Allen wrench, tighten each set screw on the 1" SHAFT COLLARS (24). See FIGURE 9.
FIGURE 10
STEP 10:
• Slide one BAR STOP (8) over each BEARING HOUSING (1) as shown in FIGURE 10.
5
25
24
8
1
24
8
1
11
6
25
2
RIGHT
Advertisement
