Advertisement
3/8 X 2",
FIGURE 12
STEP 12
¯ Attach one 3-1/2" PULLEY (4) to the FRONT LEG (1) and one 3-1/2" PULLEY (4) to the BASE CONNEC(['ION
(3) Using
2" BOLTS (10), four 3/8" WASHERS
(8) and two 3/8" LOCKNI_rTS (9). (Note: Make sure CABLE (14) is running
pUI ~! ,~YS.)
STEP 13
¯
Screw the threaded end of LEG PRESS CABLE (14) to the
PULLEY BRACKET (2) as shox~n in FIGURE 13.
FIGURE 13
3
4
5
6
10
Advertisement
