Table of Contents
Advertisement
THE FOLLOWING APPLY TO THE LG152, LG201, LG201D. LG301, LG3OlD and LGK152
ONLY.
2) Attach the connector to the brush holder. Connect the
green lead to the stator side and the brown lead to the bearing
side.
2 7 1
BROWN WIRE
GREEN WIRE
Fig. 10-21
3) Install the brush cover.
40
x
10
mm
screw
.
.
. 3 pcs.
10-3-6 CONTROL BOX
1
j Wire the generator and control box.
Connect the connectors having the same colored lead.
NOTE: All connectors can be wired. The leads
from
the same point have the same colors, but do not con-
nect themselves, but connect to other leads of the same
color.
2 j Mount the control box on the generator. (See Fig.
10-
27,
.)
59
x
15
mm bolt
. .
. 4
pcs.
NOTE: Be careful not to let the leads be caught be-
There may be extra holes in the cover that are shared
by the control box and generator. Install the control
box in the correct position.
Fig. 10-22
-
50
-
Hide quick links:
Advertisement
Table of Contents
