Power Liftgate And Liftglass Operation - Cadillac Escalade Customization Manual

E S C A L A D E / E S C A L A D E
To unfold the seat:
1. Lower the seat by lifting the
release lever (B) located to the left
of the handle on the center rear of
the seat.
2. Pull down the seat until it latches
to the floor.
3. Lift up the seatback until it locks
in place. Pull on the seatback to
make sure it is locked.
To remove a seat:
1. Fold the seatback forward by lifting
the release lever (A) located at the
bottom rear of the seatback on the
outboard side of the seat.
2. Pull rearward using the handle (C)
on the center rear of the seat.
POWER LIFTGATE AND
LIFTGLASS OPERATION
A
Power Liftgate
Use the Remote Keyless Entry (RKE)
transmitter or the power door lock
switches to unlock the liftgate.
There are several ways to open and
close the power liftgate:
• Press and hold the
Liftgate) button on the RKE
transmitter until the liftgate starts
moving.
• Press the touchpad (A) on the
inside surface of the liftgate handle
to open.
• Press the button on the bottom
B
edge of the liftgate to close.
• Press the
overhead console inside the
vehicle.
To turn off the power liftgate
function, press the
Liftgate Off) switch on the overhead
console.
Liftglass
There are two ways to unlatch the
liftglass:
• Press the touchpad (B) on the
liftgate, located above the right
side of the license plate.
• Press the
on the RKE transmitter.
(Power
E S V
button on the
(Power
(Liftglass) button