Power Liftgate - Cadillac XT4 2019 Convenience/Personalization Manual

POWER LIFTGATE ♦
OPEN/CLOSE THE POWER LIFTGATE
Power Liftgate button on the Remote Keyless
Press the
Entry (RKE) transmitter twice.
Press the Power Liftgate knob on the driver's door.
Press the touchpad under the liftgate handle to open the
liftgate.
Press the button next to the pull handle to close the liftgate.
PROGRAMMING THE LIFTGATE HEIGHT
1. Turn the Power Liftgate
knob to the 3/4 mode
position.
2. Open the liftgate.
3. Adjust the liftgate
manually to the desired
height.
4. To save the setting,
press and hold the
button next to the pull
handle for 3 seconds.
The turn signals flash
and a beep sounds
when the setting is
saved.
♦
Optional equipment
HANDS-FREE OPERATION
To open or close the
liftgate hands-free, stand
facing the vehicle behind
the left rear wheel. Kick
your foot straight under
the left corner of the rear
bumper (A).
The RKE transmitter must
be within 3 feet of the
liftgate.
♦
PROJECTED LOGO
The vehicle logo is projected on the ground (B) near the rear
bumper, indicating the kicking motion location for hands-free
operation, when an RKE transmitter is detected within 6 feet of the
liftgate. The logo is shown for 1 minute, depending on operating
conditions.
See Keys, Doors and Windows in your Owner's Manual.
19
♦
A
B