Vehicle Customization Settings; Remote Vehicle Start - Cadillac Escalade Customization Manual

E S C A L A D E / E S C A L A D E
Note: The two RKE transmitters are
specifically synchronized to either memory
button 1 or 2. If the correct memory
settings are not recalled, try using the
other RKE transmitter.
Easy-Exit Seat
The (Easy-Exit) button is located
between the two memory buttons. If
the easy-exit feature is turned on in
the DIC (see Vehicle Customization
Settings), the driver's seat will
automatically move rearward a
predetermined amount when the key
is removed from the ignition. To
move the seat back completely,
press the Easy-Exit button.
VEHICLE CUSTOMIZATION
SETTINGS
A variety of your vehicle's features
can be customized to your
preference through the Driver
Information Center. To customize
features:
1. With the vehicle in Park, turn on
the ignition.
2. Repeatedly press and release the
(Customization) button to
display available customization
features.
3. With the desired customization
feature displayed, press the
(Set/Reset) button to access the
feature settings.
4. Repeatedly press and release the
button to scroll through the
available settings.
5. With the desired setting displayed,
press the button to select it.
6. To exit the Feature Settings menu,
press the button until EXIT
FEATURE SETTINGS is displayed
and then press the button, or
press the button or
button.
Customization features include:
• Display in English
• Display Language
• Auto Door Lock
• Auto Door Unlock
• Remote Door Lock
• Remote Door Unlock
• Delay Door Lock
• Exit Lighting
• Approach Lighting
• Chime Volume
• Park Tilt Mirrors
• Easy-Exit Seat
E S V
• Memory Seat Recall
• Remote Start
• Display Digital Speed
• Factory Settings
• Exit Feature Settings

REMOTE VEHICLE START

This feature allows you to start the
engine from outside the vehicle by
using the Remote Keyless Entry (RKE)
transmitter. (Remote Vehicle Start
transmitter range is approximately
200 feet, with the vehicle in a direct
line of sight.)
After a remote start, the engine will
run for about 10 minutes before
turning itself off, but can be
extended 10 minutes by performing
another remote start sequence at any
time. After two consecutive remote
starts, no additional remote starts are
allowed until the vehicle has been
started with the ignition key.
The vehicle's climate control system
will automatically heat or cool the
vehicle interior to 74°F, and adjust
the airflow to the defrost or vent
mode depending on ambient
conditions.