Led Indicators - Planet Networking & Communication IAP-2000PS User Manual

The following is the summary table of Reset button functions:
Reset Button Pressed and Released
About 1~3 second
Over 5 seconds

2.1.3. LED Indicators

 System
LED
P1
P2
PWR
FAL
 Wireless LAN
LED
WPS
WLAN
SEC
 10/100Base-TX Ports / 100Base-FX Port
LED
1 ~ 4
FX
PoE
PoE
In-Use
Reboot the Industrial AP
Reset the Industrial AP to the Factory Default
configuration. The Industrial AP will then reboot and
load the default settings as below:
。 Default Username/Password: admin / admin
。 Default IP address: 192.168.1.1
Subnet mask: 255.255.255.0
Color
It indicates the power 1 has power.
Green
It indicates the power 2 has power.
Green
It indicates the machine is power on.
Green
It indicates either the power 1 or power 2 has no
Green
power.
Color
It indicates WPS is enabled.
Orange
It indicates the wireless LAN is enabled.
Green
It indicates the wireless security encryption is
Orange
enabled.
Color
It indicates which RJ-45 port is link up.
Green
It indicates the Fiber port is link up. (IAP-2001PE)
Green
It indicates the device is power supplied by PoE.
Orange
It indicates which RJ-45 port is providing 48V DC
Orange
in-line power.
-11-
User's Manual of IAP-200x Series
Description
Function
Function
Function