Yaesu FT1DR Instruction Manual page 25

7
Rotate O to select a message
8
Press H
[Waiting] will be displayed.
If data reception is successful,
displayed. Data will be imported, and then the content of
the message will appear.
10
Rotate O to select [BACK]
11
Press H
The data list will appear again.
Tip
On the content display screen, press M to display the sender's location information when the data
was imported.
Caution
When the category list or data list is displayed, if you press p, the FT1DR/DE transceiver will be
ready to transmit audio to the currently connected node or room on the Internet.
Connecting to a Faraway Station Using WIRES-X
will be
25
↓
O