Yaesu FT1DR Instruction Manual page 12

Connecting to a Faraway Station Using WIRES-X
7
Rotate O to select the connection destination
8
Press H
The FT1DR/DE will initiate connection and [Waiting] will
flash.
Instead of H, you can press p to establish connection
Tip
while continuing to transmit from your transceiver
When connection is successfully established,
[Connected] will appear, followed by the menu list of the
connection destination.
Tip If connection is unsuccessful, an error message will appear
and the screen will return to the list of nodes and rooms.
For an explanation of error messages, please refer to the
"Error Message Guide" (page 45).
Tip
You can list items in order according to the number of activities or access history from [7 WIRES-X]
→ [3 SEARCH SETUP] in setting mode.
● Connecting to the node or room you have most recently connected
If you have previously connected to a node or room, it will be displayed and flashing at
the bottom of the screen.
When this happens, press H to start connection, and once connection is established,
A list of available nodes will appear.
to the left of the node name, rotate the O to
If there is a
display the node you have most recently connected to.
Tip If connection is unsuccessful, an error message will appear
and the node name will return to flashing mode.
For an explanation of error messages, please refer to the
"Error Message Guide" (page 45).
● Specifying the DTMF ID of the desired node or room
1
Press F
2
Press V
The DTMF input screen will appear.
3
Enter the 5-digit DTMF ID
4
Press and hold H for 1 second or more
V to cancel input.
Tip Press
12