Yaesu FT1DR Instruction Manual page 17

7
Rotate O to select [BACK]
8
Press H
The screen will return to the menu options.
● Connecting to the registered node or room
1
Press and hold H for 1 second or more
The menu list of the local node will appear.
2
Rotate O to select one of [C1] to [C5]
3
Press H
[Waiting] will appear, followed by a list of nodes and
rooms.
Tip On room columns, the number of activities (the number of
nodes connecting to each room) appears on the right side.
4
Rotate O to select the connection destination
5
Press H
Connection will begin and [Waiting] will flash.
Tip Instead of pressing
while continuing to transmit from your transceiver.
If connection is successful, [Connected] will be displayed,
and menu options for the node will appear.
Tip If connection is unsuccessful, an error message will appear,
and the screen will return to the list of nodes and rooms.
For an explanation of error messages, please refer to the
"Error Message Guide" (page 45).
Tip
You can list items in order according to the number of activities or access history from [7 WIRES-X]
→ [3 SEARCH SETUP] in setting mode.
Connecting to a Faraway Station Using WIRES-X
H
, press p to establish connection
17