Yaesu FT1DR Instruction Manual page 14

Connecting to a Faraway Station Using WIRES-X
6
Rotate O to select [PRESET]
• Rotating O switches between [MANUAL] and [PRESET].
Tips
• The default setting is [MANUAL].
7
Press H
The frequency will appear.
8
Rotate O to select the frequency
• Rotating O changes the frequency by the increments
Tips
specified in setting mode. Pressing F and rotating O
changes the frequency by 1 MHz increments.
• Pressing B will change the preset frequency band.
• The default settings are 145.780 for band A and 438.980 for
band B.
9
Press M, 4 times
The frequency will be set, and then the screen will return to the frequency display
screen.
● Connecting to a preset channel
1
Follow the procedure in "Presetting a channel" to make the preset channel available
in advance.
2
Press and hold % for 1 second or more,
[ P ] will flash on the left side of the frequency indication.
When a local node is found, [ X ] will light up, and the
node name and city name will appear on the bottom part
of the screen.
When any local node cannot be found, [ P ] will disappear in 5
Tip
minutes.
Tip
If the local node has a different frequency than your preset channel frequency, your settings will
automatically change to the node frequency.
14