HP StorageWorks XP128 Installation Manual page 76

P-VOL
RS
RAID
RAID group
RAID level
RAM
remote instance
RISC
RM
RM instance
configuration file
R-SIM
R/W, r/w
S/390
SAM
script file
SCSI
sec.
seq.
76
The primary or main volume that contains the data to be copied.
®
Russellstoll , a brand of electrical plugs and receptacles manufactured by
Thomas & Betts Corporation.
Redundant array of inexpensive disks.
See "array group."
A RAID Level is one of the ways that disk drives are grouped together in a
RAID to improve performance, data availability/reliability or both. RAID
levels are defined from RAID0 to RAID6. HP StorageWorks Disk Arrays
in the XP product family support RAID1, RAID5 and RAID6. Not all of
these RAID levels are supported by all XP family members. Consult the
owner's guide or your HP representative for the details of which RAID
levels are supported by your specific XP disk array.
Random access memory.
The instance to which the local instance communicates as configured in the
HORCM_INST section of the RAID Manager instance configuration file.
Reduced instruction set computer.
HP StorageWorks RAID Manager XP.
A file that defines the link between a volume and a RAID Manager
instance. This file consists of four sections: HORCM_MON,
HORCM_CMD, HORCM_DEV, and HORCM_INST.
Remote service information message.
Read/write.
IBM System/390 architecture.
System Administration Manager.
A file containing a shell script.
Small computer system interface.
Second.
Sequential.
HP StorageWorks Disk Array XP128: Site Preparation Guide