Physical Requirements - HP StorageWorks XP128 Installation Manual

Physical requirements

Preparing for installation
Dimensions
An HP Disk Array XP128 consists of a single cabinet with the approximate
dimensions listed in the table below.
Minimum Dimensions mm
Height
Width
Depth
Weight
An HP Disk Array XP128 consists of a single cabinet. The table below
provides approximate weights for a minimum and maximum configuration.
The main factor that increases weight is the number of hard disk drives
(HDDs) in the disk array.
Weight
Minimum
configuration
Maximum
configuration
Specific component dimensions and weights
The following two tables provide the physical dimensions and weights for
each HP Disk Array XP128 component. The values listed in these tables
are approximate and should be used for general reference only. Use these
values to estimate hallway and door clearances as well as floor strength for
moving the disk array.
in
1860 73.6
782 30.8
800 31.5
kg lbs
655 1441
796 1751
23