OUTPUT screen
Allows you to configure how output channels will be output. The buttons displayed vary
depending on the type of output channel selected.
Output channel type
ST button
AUX 1–8
–
○
AUX9/10–AUX19/20
SUB
–
STEREO
–
○
: Displayed
– : Not displayed
1
ST button
Determines whether the stereo channel is output or not.
2
Out Gain text box
Allows you to adjust the output gain.
When selected, you can use the [TOUCH AND TURN] knob to adjust the setting. Touch
again to display the keyboard and enter a value.
Buttons
Out Gain
OMNI OUT
Φ button
button
indicator
○
○
○
○
○
○
○
○
○
○
○
○
3
Φ (phase) button
Allows you to reverse the phase.
When turned on, the output signal's phase is reversed.
4
OMNI OUT button
Displays the number of the OMNI OUT to which the channel is directed.
Up to two numbers can be displayed. For three or more numbers, "+" is displayed.
OMNI OUT
button
Displays the OMNI OUT screen.
○
5
Recall Safe button (V1.1 and later)
○
Turns recall safe on and off for the corresponding channel.
You can display the RECALL SAFE screen by touching the jump button in the right corner
○
of the Recall Safe button.
○
- 64 -
Configuration screens
(page
21)
TF Series
Reference Manual