Adjusting Eq In Manual Mode; Adjusting Eq In 1-Knob Eq Mode - Yamaha TF5 Reference Manual

<1-knob EQ mode>
How does 1-knob EQ mode work?
1-knob EQ mode allows you to adjust several parameters at once with just the turn of a knob.
It makes EQ adjustment quick and easy.
The console contains Presets that are configured for a variety of instruments. You can use 1-
knob EQ mode to adjust the EQ settings that are saved in Presets without disturbing the
overall balance of your mix.
You can even configure EQ settings using manual mode, then switch to 1-knob EQ mode and
use the Intensity type to adjust the amount of EQ applied to the channel. In this case you can
use the [TOUCH AND TURN ] knob to adjust from 0% (no EQ applied) to 50% (the EQ
settings you made using manual mode) and 100% (double the intensity of the EQ settings you
made using manual mode). This makes it very easy to fine-tune your EQ settings with just one
knob.
If 1-knob EQ mode type is set to Vocal or Loudness, you can adjust the EQ between 0% (no
EQ applied) and 100% (maximum EQ applied).
<Manual mode>
- 42 -

Adjusting EQ in manual mode

1. Display the EQ screen.
(page 5)
2. Touch the EQ button and turn on the EQ.
3. Touch the 1-knob button and turn 1-knob mode off.
4. Use the handles in the EQ graph to adjust the EQ as desired.
Drag to adjust
When you touch an EQ parameter to select it, you can then adjust it using the [TOUCH AND TURN]
knob. You can press the [SHIFT] key to switch to a different parameter. Each time you press the
[SHIFT] key, you can switch between gain (G) and frequency (F). You can also switch between G and
F by touching the corresponding area to the right of the 1-knob button.
To adjust Q, pinch in or out on the touchscreen, or touch the Q area to the right of the 1-knob button
and then use the [TOUCH AND TURN] knob to adjust the setting.
5. Turn HPF on as desired.
When using a vocal mic, you can reduce low-frequency noise (rumble noise, etc.) by turning on HPF.

Adjusting EQ in 1-knob EQ mode

1. Display the EQ screen.
(page 5)
2. Turn on the EQ and select 1-knob mode.
3. Select the desired 1-knob mode type.
4. Use the [TOUCH AND TURN] knob to adjust the EQ.
Configuration screens
TF Series
Reference Manual