Yamaha TF5 Reference Manual page 58

5
Channel on/off button
Turns the selected channel on and off.
6
Channel pan slider
Adjusts the pan for the selected channel.
7
SEND TO AUX box
Touch when selected to display the SEND TO AUX screen.
Displays the amount of signal from the selected channel that is sent to each AUX bus.
Send level, the selected channel's fader level, and the actual send level grouped with the
DCA is displayed in the horizontal bar.
The information displayed here indicates whether the signal sent to the AUX bus is the
pre-fader or post-fader signal. Pre-fader signal is displayed in green; post-fader signal is
displayed in gray.
8
ASSIGN box
Displays the ASSIGN screen. (page
9
Channel output level slider
Adjusts the fader level for the selected channel.
0
Channel output level meter
Displays the channel's output signal level.
DCA 1–DCA 8
54)
1
Channel name
Touch to display the CH NAME screen.
Touch to display information for a different channel.
2
Recall Safe button
Turns recall safe on and off for the corresponding channel.
You can display the RECALL SAFE screen
the right corner of the Recall Safe button.
3
Channel on/off button
Turns the selected channel on and off.
4
Channel output level slider
Adjusts the fader level for the selected channel.
5
ASSIGN box (V1.1 and later)
When this area is selected, touch this area to display the DCA ASSIGN screen.
(page 66)
AUX 1–AUX 8
1
Channel name
Touch to display the CH NAME screen.
Touch to display information for a different channel.
- 58 -
Configuration screens
(page 22) by touching the jump button in
TF Series
Reference Manual