Yamaha TF5 Reference Manual page 26

USER DEFINED CONTROLS screen
This screen allows you to assign features to the [USER DEFINED KEYS], [USER DEFINED
KNOBS], and to the footswitch.
1
Keys button
Allows you to assign features to the [USER DEFINED KEYS] on the top panel.
2
Key setup buttons (A–F)
Touch the desired button to display the screen that allows you to assign features to the
corresponding key.
Features that can be assigned to [USER DEFINED KEYS]
FUNCTION PARAMETER 1
No Assign
Brightness Bank Change
CH 1–40,
ST IN 1, ST IN 2,
FX 1, FX 2,
CH ON Specific CH DCA 1–8,
AUX 1–8,
AUX 9/10–19/20,
STEREO, SUB
PARAMETER 2 Description
No feature is assigned
For V1.1 and later, you can switch between
the brightness banks.
Turns the channel assigned to PARAMETER 2
on and off.
FUNCTION PARAMETER 1
Inc
Dec
CH Select
Specific CH
CUE Specific CH
Effect Bypass
Help
Meter Peak Hold ON
Output
Monitor
Source Select
Oscillator On
Oscillator
Specific CH
Bookmark
Page Change
Bookmark with
"SEL"
Close Popup
Recorder Transport
- 26 -
PARAMETER 2 Description
Select channels in order of the direction
selected for PARAMETER 1.
CH 1–40,
ST IN 1L–ST IN 2R
FX1L–FX2R,
Selects the channel assigned to
AUX 1–8,
PARAMETER 2.
AUX 9–20,
STEREO L, STEREO R,
SUB
CH 1–40,
ST IN 1, ST IN 2,
FX 1, FX 2,
Turns the cue on and off for the channel
DCA 1–8,
assigned to PARAMETER 2.
AUX 1–8,
AUX 9/10–19/20,
STEREO, SUB
FX 1, FX 2, Bypasses the effect assigned to
INS FX 1–6 PARAMETER 2.
Displays help information.
Turns the peak hold on and off.
Turns the monitor out on and off.
STEREO, SUB,
ST IN 1, ST IN 2, Selects the monitor source assigned to
USB 33/34, PARAMETER 2.
Playback
Turns the oscillator on and off.
AUX 1–20,
Turns the oscillator sent to the channel
STEREO L, STEREO R,
assigned to PARAMETER 2 on and off.
SUB
Touch and hold for more than 2 seconds to
bookmark the current screen. Touch and hold
for less than two seconds to display the
bookmarked screen.
The selected channel is saved with the
bookmark. Same as above.
Closes the popup screen.
Same as the Play/Pause button on the
Play/Pause
RECORDER screen.
Same as the Stop button on the RECORDER
Stop
screen.
Same as the Next button on the RECORDER
Next
screen.
Same as the Previous button on the
Previous
RECORDER screen.
Same as the Rec button on the RECORDER
Rec
screen.
Recording stops and the file is saved, and
Auto Rec then recording resumes immediately as a
new file.
Recording starts immediately without
Rec & Start
entering record-ready mode.
TF Series
Toolbar
Reference Manual