Yamaha TF5 Reference Manual page 23

NETWORK screen
Allows you to configure the console's network address, which is needed when you connect a
computer to the NETWORK connector.
Configure these settings according to the connected computer or network.
NOTE
When connecting the console to a LAN, refer to the TF Editor Installation Guide.
1
IP address provisioning method button
Select the setting that matches how the console will configure its IP address.
DHCP: The console receives its IP address automatically.
Static IP: The console's IP address is set manually.
2
IP Address
Determines the unique address that identifies the console on the network.
3
Subnet Mask
Defines how many bits are used for network addresses on the connected network.
4
Gateway
The address of the network device (gateway) that facilitates communication between
different devices on the network.
5
Unit Name
Allows you to specify a name that can be used to identify the console on the network.
6
PIN for MonitorMix (V1.1 and later)
This is a 4-digit password that is required when accessing the console using the
MonitorMix app. MonitorMix is an iOS-compatible app that allows performers to adjust
the levels of the monitor mix directly from the stage.
NOTE
When the DHCP button is selected, items
2 4
– are only needed when you select the Static IP button. Configure these parameters as needed.
- 23 -
2 4
– are not needed.
TF Series
Toolbar
Reference Manual