Configuring Settings In The Preference Screen - Yamaha TF5 Reference Manual

PREFERENCE screen
Allows you to configure general operating settings regarding confirmation message display,
[SEL] key behavior, etc.
1
Confirmation
Allows you to turn confirmation messages for store, recall, and patching operations.
Store, Recall: When turned on, a confirmation message will be
displayed when you perform the corresponding
operation.
INPUT Select/OUTPUT Patch: When turned on, a confirmation message will be
displayed when you change input source or OMNI OUT
patching settings.
2
Auto Channel Select
When turned on, a channel of the corresponding type will be selected automatically
when you operate that channel's fader.
You can turn this feature on and off independently for input channels and output
channels.
[CUE] > [SEL] LINK: When turned on, a channel will be selected when you turn its CUE on.
3
Memorize [SEL] Position for Each FADER BANK
Determines whether channel positions are remembered in fader banks.
4
Touch Sensing Area Optimization
Allows you to optimize the touchscreen's sensitivity.
Sit: Optimized for operating the touchscreen when you are positioned below it, such
as when sitting.
Stand: Optimized for operating the touchscreen when you are positioned above it, such
as when standing.
5
Show Help at Startup
Determines whether the HELP screen is displayed automatically after the console starts
up.
6
Help Language
Determines the language used when displaying the HELP screen.

Configuring settings in the PREFERENCE screen

1. Use the buttons on the PREFERENCE screen to configure the settings as desired.
2. When finished, touch the close button ([X]).
- 32 -
Toolbar
TF Series
Reference Manual