Alti-Ip 600 Running Messages - Altigen Alti-IP 600 Administration Manual

Alti-IP 600 Running Messages

The following messages may be displayed in the LCD when running the
Alti-IP 600:
Message
AW UNREACHABLE!
Basic-Idle!
DHCP FAIL!
INVALID IP!
INPUT AGAIN...
INVALID VAL!
NO IP ADDR!
No Network!
REGISTER FAIL!
REGISTER OKAY!
Definition
Failed to connect to the AltiGen phone server. The
user is trying to register the IP phone with an
invalid IP phone's IP address or the AltiGen
Phone Server's IP address is invalid.
Or, the network connection is lost in offhook or
connect state.
Refer to "AltiWare is unreachable."
section of "General Troubleshooting" on page 35.
IP phone is operating in Basic Mode.
Execute #27 again to reactivate.
Check IP Phone Service
Verify extension is configured for dynamic.
Although DHCP was enabled, the Alti-IP 600 was
not able to receive the IP address from the DHCP
server.
The inputted IP address is invalid.
During register of IP extension, an invalid
response (return value) returned from phone
server.
Alti-IP 600 cannot attach an IP address due to
network failure.
Phone has lost Ethernet connection.
Cannot register to the AltiGen phone server.
IP extension registered successfully.
Alti-IP 600 Administration Manual
Appendix A
39