Deleting The Registered Nodes And Rooms - Yaesu FT2DR Instruction Manual

WIRES-X Setting Mode Menus

Deleting the registered nodes and rooms

You can delete nodes and rooms registered in the 5 categories.
1
Press and hold the
Switches the transceiver to setting mode.
2
Touch [WIRES-X].
Displays the menu list.
3
Touch [4 REMOVE ROOM/NODE].
Displays the node and room lists.
4
Rotate the DIAL to select the desired category, then
press the
Displays the node and room lists.
5
Rotate the DIAL to select the node or room you want to
delete, then press the
The confirmation message appears.
key for over one second.
key.
key.
54