Using Wires-X And The Gm Function Simultaneously; Registering A Local Node To A Group - Yaesu FT2DR Instruction Manual

Using WIRES-X and the GM Function Simultaneously

You can use WIRES-X even when using the GM (Group Monitor) function on the
transceiver. By forming a group including local nodes and operating the GM function,
group members can also utilize WIRES-X to communicate with nodes or rooms on the
Internet, including exchanging data.
This section explains how to use a local node which is registered as a group member.
For details on how to use the GM functions, refer to the separate GM instruction manual
available on our website.
Cautions
z The local node must be a digital station and have the GM function enabled as well.
z Before using the GM functions, touch [MODE] to set communication mode of the A-band (shown
on the top part of the screen) to any mode other than [FM]. For details, refer to "Selecting the
Communication Mode" in the basic operating manual.

Registering a local node to a group

1
Check the call sign of the local node.
2
Set the A-band to the frequency used for the GM operation.
3
Press .
Displays the group list.
4
Touch [ALL].
Displays the call signs, distance and direction to other
nearby stations.
Tip Stations within communication range are highlighted.
48