Yaesu FT2DR Instruction Manual page 13

● Connecting to the node or room you have most recently connected
If you have previously connected to a node or room on the Internet, it appears and
flashes at the bottom of the screen.
Touch the flashing node or room to start connection, and once connection is
established, the menu list of the node (room) you are connected to will appear.
If there is on the left side of the node name on the bottom
part of the screen, rotate the DIAL to display the node you
have most recently connected to.
Tip If connection is unsuccessful, an error message appears
and the name flashes again.
● Specifying the DTMF ID of the node or room you want to connect to
1
While displaying the local node, touch [SEARCH &
DIRECT].
Displays the category list.
2
Touch [SEARCH & DIRECT].
Displays the character input screen.
Connecting to a Faraway Station Using WIRES-X
13