Releasing The Wires-X Connection - Yaesu FT2DR Instruction Manual

4
Touch the node or room you want to connect to.
Starts connection.
Tip By pressing
If connection is successful, the menu list of the node or
room you are connected to appears.
Tip If connection is unsuccessful, an error message appears
and the screen returns to the list of nodes and rooms.
Tip
You can list items in order according to the number of activities or access history from [WIRES-X]→[2
SEARCH SETUP] in setting mode.
● Disconnecting from the node or room
1
Press and hold the
If disconnection is successful, the screen returns to the local node connection
screen.

Releasing the WIRES-X connection

Pressing and holding the
frequency display screen, and [ X ] displayed on the left side of the frequency display
disappears.
Tip The local node and the node or room remain connected.
Connecting to a Faraway Station Using WIRES-X
, you can also establish connection while talking.
key for over one second.
key for over one second switches the screen to the
21