1
a
EAS2S31007
INSTALLING THE AIR FILTER CASE AND
INTAKE FUNNELS
1. Install:
• Variable intake funnel lever shaft
TIP
• To install the variable intake funnel lever shaft
into the lower air filter case, slide the bushing 1
"1" in the direction of the arrow.
• Face the cutout "a" in bushing 1 "1" downward.
1
a
a
2. Install:
• Variable intake funnels "1"
• Variable intake funnel seals "2"
TIP
Be careful not to break the pin "a" on each vari-
able intake funnel seal "1" when installing the
seals.
3. Install:
TIP
Make sure that the lower air filter case gaskets
"1" are seated in the lower air filter case grooves.
4. Check:
M
a. Connect the intake funnel servo motor cou-
b. Set the main switch to the "ON" position. The
1
c. Set the main switch to the "OFF" position.
L
7-9
AIR FILTER CASE
• Lower air filter case gaskets "1"
• Variable intake funnel movement
MMM
M MMM
M
M MMM
M
M MMM
M
pler when installing the intake funnel servo
motor into the lower air filter case.
variable intake funnels "1" move into the
down position. Make sure that the lip of the
variable intake funnel seals "2" are seated in
the fixed intake funnels "3". (illustration A)
The variable intake funnels "1" move into the
center position. (illustration B)
A
B
1
2
3
A. Down
B. Center
LLL
L LLL
L
L LLL
L
L LLL
L
a
1
New
1
M MMM
M
M MMM
M
MMM
1
2
L LLL
L
L LLL
L
LLL