Checking The Rear Wheel; Maintenance Of The Rear Wheel Sensor And Sensor Rotor; Assembling The Rear Wheel - Yamaha Vmax VMX17C 2009 Service Manual

Hexagon wrench (41)
90890-01525
YM-01525
ECA2S31017
NOTICE
The bearing retainer has left-handed
threads. To loosen the retainer, turn it clock-
wise.
1
d. Remove the wheel sensor rotor.
e. Remove the wheel bearings "1" with a gener-
al bearing puller.
L LLL L LLL L L LLL L L LLL L
EAS22090

CHECKING THE REAR WHEEL

1. Check:
• Wheel axle
• Wheel bearings
• Oil seal
Refer to "CHECKING THE FRONT WHEEL"
on page 4-14.
2. Check:
• Tire
• Rear wheel
Damage/wear → Replace.
Refer to "CHECKING THE TIRES" on page
3-31 and "CHECKING THE WHEELS" on
page 3-32.
3. Measure:
• Radial wheel runout
2
L LLL L L LLL L LLL
4-24
• Lateral wheel runout
Refer to "CHECKING THE FRONT WHEEL"
on page 4-14.
Radial wheel runout limit
1.0 mm (0.04 in)
Lateral wheel runout limit
0.5 mm (0.02 in)
EAS22200
MAINTENANCE OF THE REAR WHEEL
SENSOR AND SENSOR ROTOR
ECA2S31018
NOTICE
• Handle the ABS components with care
since they have been accurately adjusted.
Keep them away from dirt and do not sub-
ject them to shocks.
• The rear wheel sensor cannot be disassem-
bled. Do not attempt to disassemble it. If
faulty, replace with a new one.
• Keep magnets (including magnetic pick-up
tools, magnetic screwdrivers, etc.) away
from the wheel sensor rotor.
• Do not drop or shock the wheel sensor or
the wheel sensor rotor.
1. Check:
• Rear wheel sensor
Refer to "MAINTENANCE OF THE FRONT
WHEEL SENSOR AND SENSOR ROTOR"
on page 4-15.
2. Check:
• Rear wheel sensor rotor
Refer to "MAINTENANCE OF THE FRONT
WHEEL SENSOR AND SENSOR ROTOR"
on page 4-15.
3. Measure:
• Wheel sensor rotor deflection
Refer to "MAINTENANCE OF THE FRONT
WHEEL SENSOR AND SENSOR ROTOR"
on page 4-15.
EAS22140

ASSEMBLING THE REAR WHEEL

ECA2S31008
NOTICE
• Keep magnets (including magnetic pick-up
tools, magnetic screwdrivers, etc.) away
from the wheel sensor rotor.
• Do not drop the wheel sensor rotor or sub-
ject it to shocks.
• If any solvent gets on the wheel sensor ro-
tor, wipe it off immediately.
REAR WHEEL