To Dub Using Equipment With A Usb Terminal - Panasonic HC-MDH2 Operating Instructions Manual

Dubbing in high-definition picture quality
∫ To dub using equipment with an SD card slot
You can dub by directly inserting an SD card.
≥
HC-MDH2M
To copy scenes or still pictures from the built-in
memory to an SD card, see page 80.

∫ To dub using equipment with a USB terminal

You can dub by connecting a USB cable.
≥ Use the AC adaptor to free you from worrying about the battery running down.
≥ Turn on the unit.
A USB cable (supplied)
≥ Insert the plugs as far as they will go.
1
Set [USB MODE] to [DEVICE]. (
2
Connect the unit to the Blu-ray disc recorder or high-definition (AVCHD)
compatible DVD recorder.
≥ The USB function selection screen will appear on the screen of the unit.
3
Select on the screen of this unit [RECORDER] and press the button in the
centre.
≥ When you select an option other than [RECORDER], reconnect the USB cable.
4
Select the media you wish to dub and press the button in the centre.
≥ When using the battery, the LCD monitor turns off after about 5 seconds. Press the cursor button
to turn the LCD monitor on.
5
Dubbing through operations on the Blu-ray disc recorder or high-definition
(AVCHD) compatible DVD recorder.
≥ Do not select [CHANGE MEDIA] on the screen of this unit during dubbing.
DEVICE
110)
l
- 90 -