Table of Contents
Advertisement
∫ If AVCHD scenes do not change smoothly when played back on
another device
The images may be still for several seconds at the joins between the scenes if the following
operations are performed when multiple scenes have been continuously played back using another
unit.
≥ Just how smoothly the scenes will be played back depends on the playback unit. Depending on
the unit used, the images may stop moving and become still for a moment even when none of the
following conditions are applicable.
≥ A continuous recording of motion picture data that exceeds 4 GB may momentarily stop at every
4 GB of data when played back with another device.
≥ When [REC FORMAT] is changed
≥ When the scenes were recorded on different dates
≥ When scenes lasting under 3 seconds have been recorded
≥ When PRE-REC was used for recording
≥ When the Time Lapse Recording is used
≥ When deleting scenes
≥
HC-MDH2M
When selected scenes are copied between an SD card and the built-in memory
≥ When scenes recorded more than 99 scenes on the same date
Principal reasons for not playing back smoothly
- 127 -
Advertisement
Table of Contents
